Good general purpose Detector! Can find anything giving off and RF Signal - Such
as; ‘Bugs’ and Wireless microphones, Wireless Home Phone Taps, Wireless Cameras
and even Tracking Devices.
Find hidden RF transmitters (bugs) planted in your home, office, car or attached
to your telephone line. The TD-17 is designed to locate the most common type of electronic
bug - the miniaturized radio transmitter - which can be planted by almost anyone,
In use, the TD-17 warns you of the presence of a nearby RF transmitter, within the
frequency range of 1 MHz to 1,000 MHz by the RF ALERT LED. The flashing RANGE LED
and audio tone give an indication of the distance to the bug. The SENSITIVITY control,
along with the two LEDs, helps you quickly zero in on hidden bugs. (After a little
training, a five year old child was able to locate a well-hidden transmitter in a
1,600 sq. ft. building in less than 5 minutes.)
The TD-17, which weighs 7 oz., is furnished in a high-impact case that measures 5.3"
x 3.3" x 1.5". The antenna can be extended 33" and telescopes into the case for convenient
storage. The unit comes complete with battery, antenna and instruction manual.
The TD-17 Basic Detector
Keep your private conversations private! The AJ-34 AUDIO JAMMER protects your sensitive
room conversations by generating a random masking sound which desensitizes any near-by
Effective against any microphone based eavesdropping device including tape recorders,
RF transmitters, hard-wired microphones (including contact type) and shotgun microphones.
It also protects against microwave or laser reflection pickups.
Because the sound from the jammer varies randomly in frequency and amplitude, it
cannot be easily filtered and the only sound the eavesdropper will hear is the jammer
The convenient end-mounted control lets you select the level of protection for your
situation. One unit will protect up to 150 sq. ft. For protecting rooms larger than
this, we recommend and additional jammer for each 150 sq. ft. of area.
The illustrated instructions show suggested jammer placement for different types
of rooms and situations so that you can use the AJ-34 effectively. The AJ-34 is powered
by one 9 volt alkaline battery (included). The unit measures 4" x 2.5" x 1.5" and
weighs 7 oz.
AJ-34 AUDIO JAMMER.
To detect those 2.4 GHz video (Wireless Spy Cameras) and audio RF links, give our
new microwave detector a try. The MD-12 detects RF in the 900 MHz to 3.2 GHz range
and displays the relative signal strength on the sensitive front panel meter. Even
low power 2.4 GHz video links can be detected from 4 to 12 feet away.
By using the Sensitivity control along with the signal strength meter, you can quickly
zero in on the location of hidden microwave transmitters, while special built-in
filtering lets the unit ignore out-of- band signals.
The MD-12 measures 5.3" x 3.3" x 1.5" in a high-impact black case. It weighs 7 oz.
and comes complete with 9 volt battery and illustrated instructions.
Microwave Detector [MD-12]
Advanced Transmitter Detector [TD-53]
If you suspect your premises are bugged, for your own peace of mind, check it out.
The TD-53 can be used to detect, verify and locate hidden transmitters in your home,
office or car.
Use the TD-53 to perform a professional RF sweep of your premises, including your
telephone system. Similar in operation to a Geiger counter, the sensitive antenna
system can be used to probe all areas of a room. As the antenna approaches the hidden
transmitter, the audible tone clicks faster and faster while the ten step solid-state
meter indicates the signal strength.
At this point, switch modes from Detect to Verify to differentiate a bug from a regular
radio or TV transmission. If a bugging device is present, a continuous squealing
tone is generated by the TD-53. By sweeping the probe, this tone can lead you directly
to the bug. The switch selectable SENSITIVITY level improves detection capabilities
of the unit in high signal strength areas. For private (non-alerting) listening,
an earphone jack is provided.
Included with the TD-53 is the P-01 wideband active probe which covers 5 MHz to 2,500
MHz. The P-01 can be positioned up to 25 feet away from the TD-53 by using an extension
cable. For example, the probe could be discreetly placed in a target room while the
TD-53 is monitored in another room. Several other plug-in probes are available which
will extend the usefulness of your TD-53 (see the next two pages). The unit measures
5.8" x 3.4" x 2" (with cover closed) and weights 9 oz. It is powered by one 9 volt
alkaline battery (included). Also included is an illustrated instruction manual.
OPTIONAL TD-53 ACCESSORY PROBES
(These Probes must be used with a TD-53)
P-02 INFRARED (IR) PROBE
Light beams, especially lasers, provide an excellent method for carrying audio intelligence
and are not detectable by RF (radio frequency) detectors. The P-02 is a special probe
which allows you to search for sources of infrared (IR) transmissions. In the case
of amplitude modulated or pulse frequency modulated sources, you can actually listen
and determine if the IR beam is carrying voice or other intelligence.
P-03 LINE DRIVER
The P-03 Line Driver Probe lets you use the TD-53 for checking wire pairs for hidden
microphones. One of the two LEDs on the P-03 alerts you to the presence of voltage
on a wire pair. The other LED alerts you to current flow in a wire pair when the
Line Driver switch is operated.
The Line Driver switch applies a voltage to the wire pair under test to turn on voltage
activated microphones. The A/B switch reverses the polarity of the voltage for detecting
polarity sensitive devices. You can also monitor the wire pair through the TD-53
amplifier and speaker to determine if room audio is present on the pair. Any of the
above conditions can indicate a microphone attached to the wire pair under test.
04 CARRIER CURRENT/VIDEO CAMERA PROBE
The P-04 is used in conjunction with the TD-53 for detecting carrier current transmitters
and concealed video cameras. Examples of carrier current transmitters are the wireless
intercoms and room monitors sold in many electronics stores and catalogs. Carrier
current eavesdropping devices can be connected to power lines, phone lines or other
wire pairs. The probe covers from 10 KHz to 600 KHz in two ranges. It uses a directional
pickup loop and no connection to the power lines or other wires under test is necessary.
Any demodulated audio is fed to the TD-53 for monitoring and verification purposes.
Transmitter Detector II [TD-15]
For those who need a very sensitive radio frequency (RF) detector, we recommend the
TD-15. With its bandwidth of 1 MHz to 2500 MHz and its extra sensitive circuitry,
it will pick up signals that other detectors may miss. It is designed to pick up
subminiature radio transmitters wherever they are located - in your home, office
Using the convenient SENSITIVITY control and meter readings, you can quickly zero
in on hidden transmitters. You can also use the TD-15 to check your telephone and
its associated wiring for RF bugs and taps.
Because of its high sensitivity, the TD-15 is not recommended for use in areas with
high levels of ambient RF unless you are willing to spend a little time experimenting
with and becoming familiar with the operating characteristics of the unit.
The TD-15, which weighs 7 oz., is furnished in a high-impact case that measures 5.3"
x 3.3" x 1.5". The telescoping whip antenna can be extended 33". The unit comes complete
with 9 volt battery, antenna and instructions.
While it is useful (almost necessary), the telephone is the most serious threat to
your privacy in existence today. Your phone line can be wiretapped or bugged and
the telephone instrument itself can be quickly and easily converted to a very efficient
Not too much can be done about down-line taps. However, using the TAP TRAP™, you
can check your phone line for on-premises series and parallel bugs and wiretaps.
You can also check your telephone for the most common types of hookswitch bypasses.
A hookswitch bypass is a modification to the telephone instrument so that the carbon
microphone (transmitter) or dynamic earphone (receiver) will pick up room sounds
and pass them down the phone line to a listening post even with the phone hung up.
This effectively turns the telephone into a room monitor.
The TAP TRAP™ detects series devices with a resistance of 61 ohms or more. (Most
series taps have a resistance of over 100 ohms.) It also detects parallel devices
with a resistance of 65 megohms or less. (Most parallel taps are under 30 meg-ohms.)
It can also detect certain capacitively coupled taps. It weighs 7 oz. and is furnished
in a high impact case that measures 4.25" x 3.25" x 1.5". The unit comes complete
with all necessary plugs, cords, adapters, battery and an informative, illustrated
Please note that neither the TT-46 or TT-07 are "magic boxes" that are connected
permanently to a working phone line. They are both test sets that let you check your
on-premises wiring and telephones for eavesdropping devices or taps. In order to
do this, you must be able to disconnect your inside wiring from the telephone line
coming into your home or business.
This is done at the interface between the telephone line and inside wiring; usually
just by unplugging a cable at the interface box mounted on the side of the building.
There is nothing difficult about this, but, of course, you must have access to this
Wiretap Detector [TT-07]
Because video surveillance is becoming more common, you need to be able to detect
that type of privacy invasion. The VCD-42 can help you quickly determine if hidden
surveillance cameras are being used in any room. (Wired & Wireless)
Video cameras radiate a signal that can be picked up by the VCD-42's internal directional
antenna. When a video camera is detected, the red LED on the VCD-42 glows brightly.
By using the Sensitivity control along with the directional antenna, you can quickly
pinpoint the camera's location. Our tests with various cameras have shown a detection
range that varies from 3 feet to 12 feet, depending on the type of camera.
The VCD-42 measures 4" x 2.5" x 1.5", weighs 6 oz. and is furnished complete with
9 volt battery and illustrated instructions.
Video Camera Detector [VCD-42]
They can try hiding their cameras from you but they won't succeed in concealing them
from this laser detector. It uses the latest technology - two pulsating lasers --
to find wired or wireless cameras concealed as far as 80 feet away. A glance through
the viewfinder reveals pinhole cameras and even those hidden in objects like smoke
detectors. The flashing red light lets you know when you've found something. And
with it, you can be sure they won't find you.
Detects Hidden Video Cameras Dead or Alive!
Detects Wired & Wireless Hidden Video Cameras!
Very small light weight and portable size.
Detecting sensitivity adjustable
Laser detecting range of wired cameras (self-shoot): 0.1 -20 m
Detecting range of RF device: 0.05 - 24 m
Power supply: 1.5V AAA battery x4 Up to 6 hours ofcontinuous use.
Viewing Lens: IR filtered lens
Current consumption: 80mA
CD300 Detection Device
CD300-Laser Camera Detector
The Super Spy Video Detector
Many people have the feeling theyre being watched or eavesdropped on. But this is
an issue of particular importance for law enforcement personnel and spies. Sometimes
while youre keeping tabs on others you also need to know whether somebody's keeping
tabs on you. And its not like you can just ask and expect an honest answer. At those
times, this device is your best friend.
This wireless camera detector will expose both wired and wireless cameras, dead or
alive. The ultra advanced hand held unit will also let you know about RF bugs and
wiretaps in one of three ways: with an alarm, silent LED or silent vibration. Locates
bugs on frequencies from 1 MHz to 6500 MHz. Alerts to VHF, UHF and GSM devices. This
particular unit also has an internal Li-Ion battery, eliminating the need for pesky
batteries. Best of all this unit is geared with the professional in mind. The built
in compass will make locating and notating locations of bugs during large building
sweeps a breeze. Included with this unit is also a set of earbuds, allowing you to
sweet without distracting others.
* Detects Hidden Video Cameras Dead Or Alive!
* Wide Range Sweep For Bugs From 1MHz - 6500MHz.
* Detects Wired & Wireless Hidden Video Cameras!
* Silent Alert Vibration Mode
* Alarm alert mode
* Silent LED Alert Mode
* Instant auto-detecting function
* Wide Band RF bug detector with working frequency between 1MHz - 6500MHz
* Also sweeps and detects VHF, UHF,GSM bugs.
* Very small light weight and portable size.
* Adjustable sensitivity
* Multi-alarming mode: vibrating, beeping & LED
* Viewfinder combined with flashing LEDs for detecting camera lens
* Detecting frequency range: 1MHz - 6500MHz.
* Laser detecting range of wired cameras (self-shoot): 0.1 - 20 m
* Detecting range of RF device: 0.05 - 10 m (subjected to the transmitting power
of the RF device)
* Viewing Lens: IR filtered lens
* Size: 93x47x16mm
* 1 MDSD Detection Device
* 1 Instruction Booklet
* 1 Set of earbuds
* 1 Power adapter
The CMS-15 Countermeasures Set is the most advanced countermeasures set designed
for the person who wants to be able to perform a professional countermeasures inspection,
either for his own security or as a business offering the service to others. The
set is built around the TD-53 Advanced Transmitter Detector and the TT-46 Advanced
Wiretap Detector. The CMS-15 Countermeasures Set consists of the following items:
- TD-53 Advanced Transmitter Detector
- P-01 Wideband RF Probe
- P-02 Infrared Probe
- P-03 Line Driver
- P-04 Carrier Current/ Video Camera Probe
- TT-46 Advanced Wiretap Detector
- Padded Carry Case
- Instruction Manual
- Various cords and adapters
Professional Countermeasures Set II [CMS-15]
MR. SECURITY” 8011 PIONEER BLVD., WHITTIER, CA 90606 USA 1-800-594-3318